Page 1 of 1

Engine timing chain cover - what's the round cover for?

Posted: Tue Dec 17, 2013 12:30 am
by pushrod
In the process of stripping the motor down for a rebuild. Can anyone tell me what the round plug like cover on the timing chain cover is for?

Is this normal on a Tiger 260 or is it something I've inherited from a different car/motor set up.

Photo 1 below shows the cover circled in yellow, photo 2 is a view from another angle.

Thanks

Lou.

Image

Image

Engine timing chain cover - what's the round cover for?

Posted: Tue Dec 17, 2013 10:36 pm
by redbaron
Lou,
the round blanking plug that you have was for an early 221/260 timing cover which had a breather tube fitted,if you look in photo 2 you will see a hole in the front of the block which would match up to the breather tube on the alloy cover.
Later 260/289 engine did not have this on the timing cover.

David

Posted: Tue Dec 17, 2013 10:45 pm
by pushrod
Thanks David.

Were any Tigers fitted with the breather tube or did this pre-date the model.

Wonder how it came to be fitted to my car.

I'll leave it on for the novelty factor!

Lou.